Ken Kutaragi talks more about PlayStation 3: what to do with defective Cell chips.
http://www.gamespot.com/news/2005/06/20/news_6127799.html
Kutaragi talks more on PlayStation 3
Sony Computer pres says defective PS3 Cell chips may end up in home servers;
back Blu-ray (again) as the only choice.
In the latest issue of Nikkei Electronics, Sony Computer Entertainment
president Ken Kutaragi talked about some of the various functions and
aesthetics of the Cell chip, which will be used in the PlayStation 3. In the
article, Kutaragi detailed how the aesthetics of the Cell chip will cut its
production costs, as well as how it may also lead to a dual-CPU Cell home
server.
Kutaragi stated earlier that although the Cell microprocessor comes with
eight synergistic processor elements (SPEs) for multicore processing, the
chip only uses seven of them. Kutaragi explained that ignoring one SPE as a
redundancy will improve the chip's production yield and allow costs to drop
dramatically. In other words, Sony can ship a Cell chip with one defective
SPE (out of its eight) as a working product, since the chip only uses seven
SPEs to begin with.
"This is the ultimate aesthetic. The number of SPEs we equip to the Cell and
how many we will actually use are two different things. I wanted to adopt
the idea of 'redundancy' to the development of semiconductors. Logic LSIs,
excluding memory chips, are considered defective and unshippable if just one
transistor or line doesn't work. If the Cell's final chip dimension is about
200 square millimeters, making one without any defects is extremely
difficult. We can't reach our anticipated production yield with that. Of
course, we'll take various measures to lower the defect density, but that
won't be enough. But by considering one or two SPEs as a redundancy from the
very beginning, we can still use a Cell chip even if it's partially
defective," Kutaragi said, who also revealed that a similar scheme would
also be used for the PlayStation 3's RSX graphics processor.
"An interesting question is what will be done with the Cell chips that only
have six working SPEs," continued Kutaragi. "We won't use it for the PS3, of
course. Rather, I'm seriously thinking about using two of these chips to
create a home server. Home servers have less of a constraint in case size
and board dimension when compared to the PS3, and we can make enough space
for two Cell chips. That will make it a product with a total of 12 SPEs.
This is possible with the Cell since it can use as many SPEs as it needs.
And this will bring a use to Cell chips that aren't fit for the PS3."
Kutaragi went on to explain that one of the reasons why the Cell chip for
the PS3 was announced to run at 3.2GHz at E3 was due to heat issues. Back
when the chip was first announced at the International Solid-State Circuits
Conference (ISSCC), its spec said that the chip could run at 4GHz. "We could
create a 4GHz Cell if we were aiming to sell it for a high-end computer,"
Kutaragi said. "There's also the issue of heat. We might have had to create
the PS3 with a bigger body if we adopted a 4GHz chip for it."
Kutaragi commented that the PS3's detachable hard drive would most likely be
80GB, since that's the standard capacity of a general 2.5-inch hard drive.
"We're going to run an all-purpose OS on it," Kutaragi said, which seems to
back up his previous comments that he plans to preinstall Linux on the PS3's
HDD.
Kutaragi was asked if he has any plans to add a DVD recorder or home server
capability to the PS3. "In that case, you'll need at least one terabyte of
disc space" he said. "Even that much space won't be enough if it's going to
be HDTV-compliant. To put that much HDD space into this machine is
impossible. Rather than to equip some mediocre amount of HDD space, it's
better to make it detachable. There's also the possibility of a home server
equipped with the Cell chip. But when we first release it as a game machine,
we won't need an HDD."
Kutaragi also talked about his decision to adopt Blu-ray for the PlayStation
3 rather than wait a bit longer to see if the Blu-ray and HD-DVD factions
would come to a final conclusion on a unified disc standard. "E3 was the
last chance," Kutaragi said. "The PS3 is the console of the future, so I
wanted an extreme amount of capacity. But for that, we need cutting-edge
technology, and not technology that is currently available. My suggestion
was to come to an agreement with a physical format that is as close to [the
Blu-ray's] 0.1mm as possible. But the PS3 launches in spring 2006. If we had
continued to wait for a unified standard, we wouldn't be able to release the
PS3. We no longer have any more time. It's game over."
Kutaragi strongly stressed that he has no plans to compromise on the
Blu-ray's 0.1mm physical format, which gives it the upper hand to HD-DVD in
terms of capacity. However, he said that he could wait until spring 2006 to
see if Sony and Toshiba could come up with a unified standard that's still
based on the Blu-ray's physical format. As long as the change is only in the
disc's logical structure, the PS3 can still adapt to it with some software
updates. Despite Kutaragi's comments, it's been reported that Toshiba and
Sony are still in negotiations on a standard format.
Kutaragi also talked about the look of the PS3, commenting that he and Teiyu
Goto, the console designer of the original PlayStation and the PS2, decided
to give the PS3's body a curved surface after considering shapes that hadn't
existed in either consoles or computers in the past. When asked if the
curved surface made developing internal architecture difficult, Kutaragi
said that internal architecture was already being considered when the body
was designed, like where the BD-ROM reader's motor and connectors would be
placed, as well as how heat would be released. Kutaragi also stated that he
prepared three PS3 mock-ups for E3 in silver, white, and black. He settled
on the silver one, after gathering a consensus from a variety of different
developers and distributors.
"When we released the PlayStation in 1994, Nintendo's Famicom was
mainstream," Kutaragi said. "We wanted to create a game machine that
wouldn't lose to them, so it's true that we were conscious about the Famicom
when we decided on the PS's color and shape. When we released the PS2 in
2000, our goal was to make it blend in naturally with home electronics. We
wanted it to be lying around the TV, but not as a game machine, and we
worked hard on its DVD playback capabilities. When people used the
[original] PS, they'd take it out and unwrap the controller's cord, and then
put it back when they were finished playing with it. I hated that. Home
electronics always sit right next to a TV, and home electronics are black.
So we made sure that the PS2 was black. However, the PS3 will go beyond home
electronics and computers. There is no prior example to what the PS3 will
be."
By Staff -- GameSpot
POSTED: 06/20/05 12:23 PM PST
begin 666 b.gif
K1TE&.#EA`0`!`( ``,# P ```"'Y! $`````+ `````!``$```("1 $`.P``
`
end
Fnews-brouse 1.9(20180406) -- by Mizuno, MWE <mwe@ccsf.jp>
GnuPG Key ID = ECC8A735
GnuPG Key fingerprint = 9BE6 B9E9 55A5 A499 CD51 946E 9BDC 7870 ECC8 A735