To change the card in our 8200's, I use a very small flat head screwdriver 
that catches between 2 points (not across from each other).  It's tricky 
without the special key with the hole in the centre.  Once the cover is off, 
it should just be a small card that you can easily take out.  Be careful 
when you pull the antenae off the card, very fragile.

Why not just disable the card in the BIOS and install a USB card?  Very 
small and 54 Mb/s.
-- 
Thanks,
TheBurgerMan
at
gmail.com
--
"Thomas Maier" <thomas.maier@msn.com> wrote in message 
news:43270c5e_2@news.arcor-ip.de...
> Hello
>
> I have a Satellite Pro 4600. There is a original Wlan-Card with speed of 
> 11mb/sek. I need a newer card with 54mb/sek an security WAP.
>
> I have found some ones. No I would like to know the following:
>
> - Is it possible to change to a card from another manufacturer?
>
> - Where can I find a key to open the screws? There are 6 corners with a 
> pin in the middle. Very exotic!
>
> - Do I just need to open the plastic cover and change the old with the 
> newer one, or is there more to do? (like take the keyboard out and so on).
>
> Would be very thankfull for all help.
>
> Greets
> Thomas Mayer from Germany
>