X-Received: by 10.129.87.21 with SMTP id l21mr35094279ywb.20.1441877314086;
        Thu, 10 Sep 2015 02:28:34 -0700 (PDT)
X-Received: by 10.50.77.39 with SMTP id p7mr16541igw.7.1441877314056; Thu, 10
 Sep 2015 02:28:34 -0700 (PDT)
Path: news.ccsf.jp!tomockey.ddo.jp!border1.nntp.dca1.giganews.com!nntp.giganews.com!v79no77133qge.0!news-out.google.com!nt1ni6225igb.0!nntp.google.com!kq10no2619892igb.0!postnews.google.com!glegroupsg2000goo.googlegroups.com!not-for-mail
Newsgroups: fj.engr.mech
Date: Thu, 10 Sep 2015 02:28:33 -0700 (PDT)
In-Reply-To: <1111666471.285110.272850@g14g2000cwa.googlegroups.com>
Complaints-To: groups-abuse@google.com
Injection-Info: glegroupsg2000goo.googlegroups.com; posting-host=106.186.17.41;
 posting-account=KIHorgoAAAA2KHfhRI55e2uJIHrsrN4J
NNTP-Posting-Host: 106.186.17.41
References: <1111666471.285110.272850@g14g2000cwa.googlegroups.com>
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <9ebfdaae-c801-4799-ae0b-468b9e74b952@googlegroups.com>
Subject: Re: Gearbox
From: zwgearbox@gmail.com
Injection-Date: Thu, 10 Sep 2015 09:28:34 +0000
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Lines: 36
Xref: news.ccsf.jp fj.engr.mech:168

=E5=9C=A8 2005=E5=B9=B43=E6=9C=8824=E6=97=A5=E6=98=9F=E6=9C=9F=E5=9B=9B UTC=
+8=E4=B8=8B=E5=8D=888:14:31=EF=BC=8Cmvs...@gmail.com=E5=86=99=E9=81=93=EF=
=BC=9A
> Can Any one say about the methods used for checking the backlash in a
> industrial gearbox (Reducer)
>=20
> It can be Helical, planetary, Bevel-Helical, Etc....
>=20
> As a gearbox how can we calculate the Backlash of the gerabox
>=20
>=20
> any useful links, etc....
>=20
>=20
> Thanks and Best Wishes
>=20
>=20
> Mani VS

What are the methods of troubleshooting for micro motor?
The micro motor reducer serial products is mechatronic product composed of =
micro gear reduction box, governor, speed control motor or constant speed m=
otor. Here to provide a general reduction motor troubleshooting method:
1, The motor overheating, check the actual load, adjust to the specified va=
lue or replace the larger power of the reducer, Oil using in accordance wit=
h the provisions.
2, knocking noise and irregular mesh micro reducer oil checking. Micro redu=
cer lubrication oil may deteriorate after a period of time using because of=
 various     reasons, therefore, to check the oil lubrication at regular in=
tervals is necessary. Micro deceleration motor to check the oil quality is =
first cut off the power supply and wait for the micro reducer cooling, open=
 oil drain bolt to obtain oil, if oil deterioration, the lubricating oil sh=
ould be immediately replaced.
3, Abnormal stable operation noise. Bearing damage, need to replace the bea=
ring.
4, Abnormal operation noise. Renewing the oil or more oil to rated value.
5, Air leakage. Correct oil level and correct installation of ventilators