SolidWorks 2008 Office Premium, (Win32/64), TurboCAD.Professional.v14,
Bentley.Microstation.GEOPAK.Suite.v8.08.02.73,
Bentley.InRoads.Suite.XM.Edition.v8.09.01.42, Chief.Architect.X1.v11,
Actel.Designer.v8.0, PTC.Pro.Engineer.Wildfire.v3.0.M090,
Tekla.Structures.v13 1CD , Abaqus.v6.7.Win64/Linux64, other 2007/July/
12 new programs,

clearing, garage sales, buy, risk-free purchase, cutting edge, state
of the art, working, tested, fully functional, very cheap discounted
price, low cost,

------------------------------------------------------------------------

SolidWorks 2008 Office Premium, (Win32/64), incl. COSMOSWorks,
COSMOSXpress, COSMOSMotion, MoldflowXpress, PDMWorks, Toolbox,
TolAnalyst, Weldments, eDrawings, 1 DVD

2007/07/12 TurboCAD.Professional.v14
2007/07/12 Bentley.Microstation.GEOPAK.Suite.v8.08.02.73
2007/07/12 Bentley.InRoads.Suite.XM.Edition.v8.09.01.42
2007/07/12 Bentley.Civil.Extension.For.InRoads.XM.v8.09.01.42
2007/07/12 Lambdares.OSLO.Premium.v6.41

2007/07/12 Chief.Architect.X1.v11 1DVD

2007/07/09 GibbsCAM.2007.v8.5.15
2007/07/09 Bentley.InRoads.Suite.XM.Edition.v8.09.01.42

2007/07/09 Actel.Designer.v8.0 1CD
2007/07/09 PTC.Pro.Engineer.Wildfire.v3.0.M090 1DVD
2007/07/09 Tekla.Structures.v13 1CD
2007/07/09 Dassault.Systemes.CATIA.V5R17.SP6(Win32/64) 2DVD
2007/07/09 MSC.Adams.2007.R1 1CD
2007/07/09 MSC.EASY5.v2005.R1.4 1CD
2007/07/09 Abaqus.v6.7.Win64/Linux64 3CD/3CD

2007/06/26 MSC.SimOffice.R2 1CD
2007/06/26 MSC.Dytran.2007.R1 1CD
2007/06/26 NI.Circuit.Design.Suite.Pro.v10.0.1 1CD
2007/06/26 NI.SoftMotion.Controller.v2.1 1CD

2007/06/25 GibbsCAM.2007.v8.5.13
2007/06/25 Graphitech.Cimagraphi.v8.09
2007/06/25 ETA.VPG.v3.2
2007/06/25 ETA.CAD.Translator.v1.200704
2007/06/25 Bentley.Microstation.Prerequisite.Pack.v8.09.04.01
2007/06/25 CSI.SAFE.Plus.Detailer.v8.1.0
2007/06/25 Aldec.Active.HDL.v7.2
2007/06/25 Aldec.Riviera.v2007.02
2007/06/25 DownStream.CAM350.v9.5.1
2007/06/25 SynaptiCAD.AllProducts.v11.19c

2007/06/25 Surfware.SurfCAM.Velocity.III.SP1 1CD
2007/06/25 Megatech.MegaCAD.3D.v2007 1CD
2007/06/25 Invensys.Simsci.ProII.V8.1 1CD
2007/06/25 IMSIDesign.TurboCAD.Designer.v14 1CD
2007/06/25 Bentley.Microstation.XM.v08.09.04.44 1CD
2007/06/25 ProCAD.3DSmart.v2007.1 1CD
2007/06/25 Omega.v2.6.Multilanguage 1CD
2007/06/25 UGS.NX5.x64 1DVD
2007/06/25 UGS.Femap.V9.3 1CD
2007/06/25 Abaqus.v6.7.Linux32 2CD

=====================================================================

Autodesk.Productstream.Pro.v2008, Graphisoft.ArchiCAD.v11, new Bentley
programs, Proteus.Engineering.FASTSHIP.v6.1.29, MAESTRO.v8.7.6,
PTC.Pro.ENGINEER.Wildfire.v3.0.M080(Win32/64/Linux),
MSC.MD.Patran.v2006.R2, CSI.ETABS.NL.v9.1.4, other

A- Z, CAx, CAD, CAM, CAE, electronics, EDA, LSI, PCB, FPGA, VHDL, &
Other Design CDs, A - Z, updated 2007/June/30

-----------------------------------------------

Garden Design programs

Drafix.PRO.Landscape.v13.0 3CD
DynaSCAPE Design and Quote
DynaSCAPE Quote
DynaSCAPE Manage


Plant and Piping Software Design

AVEVA Plant Design and Engineering,
Bentley DigitalPlant,
CADWorx Plant and CADWorx P&ID 2007,
Intergraph SmartPlant P&ID 4.2,
PROCAD's 2D DESIGNER and 3DSMART,
QuickPen International PipeDesigner 3D 3.9,

2007/06/03 Bentley.TriForma.2004.Edition.v8.05.04.18
2007/06/03 Bentley.Building.Electrical.Systems.XM.v08.09.03.05
2007/06/03 Bentley.Electric.XM.v08.09.03.05
2007/06/03 Bentley.Redline.XM.v08.09.03.66
2007/06/03
Bentley.Geospatial.Extension.v08.09.03.19.for.Microstation.XM
2007/06/03 Bentley.PowerSurvey.v8.09.00.51.for.Powerdraft.XM
2007/06/03
Bentley.speedikon.Architectural.v08.00.00.25.for.MicroStation.XM
2007/06/03
Bentley.speedikon.Industrial.v08.00.00.25.for.MicroStation.XM

2007/04/28 Bentley.Microstation.XM.v8.09.03.66
2007/04/28 Bentley.Microstation.Structural.XM.v8.09.03.46

2007/04/14 Bentley.Microstation.Triforma.XM.v08.09.03.50
2007/04/14 Bentley.Building.Mechanical.Systems.XM.v08.09.03.45
2007/04/14 Bentley.Geopak.Civil.Extension.v08.08.02.40
2007/04/14 Bentley.Microstation.Architecture.XM.v08.09.03.37
2007/04/14 Bentley.Microstation.Prerequisite.Pack.v8.09.03.09
2007/04/14
Bentley.speedikon.Architectural.v08.00.00.24.for.MicroStation.XM
2007/04/14
Bentley.speedikon.Industrial.v08.00.00.24.for.MicroStation.XM

Nr=5366 ANSYS PRODUCTS V11.0 (CAD/CAE/FEA) 1DVD

   ANSYS SIMULATION SUITE
ANSYS Multiphysics
ANSYS Mechanical
ANSYS Structural
ANSYS Professional
ANSYS DesignSpace

   ANSYS PHYSICS VERTICALS
ANSYS EMag
ANSYS LS-DYNA
ANSYS Drop Test Module

   ANSYS WORKBENCH MODULE
ANSYS DesignModeler
ANSYS BladeModeler
ANSYS DesignXplorer
ANSYS DesignXplorer VT
ANSYS Fatigue
ANSYS ICEM CFD
ANSYS AI*Environment
ANSYS CFX
ANSYS AutoDYN

   ANSYS ELECTRONICS SUITE
ANSYS TAS (Thermal Analysis System)
ANSYS TASPCB (TAS Printed Circuit Board)
ANSYS PTD (Package Thermal Designer)

   CIVIL & STRUCTURAL SUITE
ANSYS CivilFEM Intro
Bridges & Civil Nonlinearities Module
Geotechnical Module
Advanced Pre-Stressed Concrete Module

-----------------------------------------------

AutoCAD
2006/05/18 Autodesk.AutoCAD.Electrical.v2007 1DVD
2006/05/08 Autodesk.AutoCAD.Mechanical.v2007 1DVD
2006/04/09 Autodesk.AutoCAD.2007 1DVD
2006/04/09 Autodesk.Productstream.v5.0 3CD
2006/05/15 Autodesk.Land.Desktop.v2007 4CD
2006/05/15 Autodesk.Civil.Design.v2007 1CD
2006/05/15 Autodesk.Survey.v2007 1CD
2006/05/18 Autodesk.AutoCAD.Electrical.v2007 1DVD
2006/05/24 Autodesk.MAP.3D.v2007 2CD
2006/05/24 Autodesk.AutoCAD.LT.v2007 1CD
2006/05/25 Autodesk.VIZ.v2007 2CD
2006/06/03 Autodesk.Revit.Building.v9.0 3CD
2006/06/03 Autodesk.Architectural.Desktop.v2007 4CD
2006/06/03 Autodesk.Raster.Design.v2007 1CD
2006/06/10 Autodesk.Showcase.v2007 1CD
2006/07/17 Autodesk.Civil.3D.v2007 1DVD
2006/08/16 Autodesk.Building.Systems.v2007 5CD
2006/08/16 Autodesk.Inventor.Series.v11 5CD
Autodesk.Inventor.Professional.11 1 DVD
2006/08/16 Autodesk.AutoCAD.Mechanical.v2007 2CD

2007/03/05 Autodesk.AutoCAD.v2008 2CD
2007/03/05 Autodesk.AutoCAD.LT.v2008 1CD
2007/03/22 Autodesk.AutoCAD.Architecture.v2008 1DVD
2007/03/22 Autodesk.AutoCAD.Electrical.v2008 1DVD
2007/03/22 Autodesk.AutoCAD.Mechanical.v2008 1DVD

2007/04/28 Autodesk.Inventor.Pro.v2008 2DVD
2007/04/28 Autodesk.Revit.Architecture.v2008 1DVD
2007/04/28 Autodesk.AutoCAD.MEP.v2008 1DVD
2007/04/28 Autodesk.AutoCAD.MAP.3D.v2008 6CD

2007/06/03 Autodesk.Productstream.Pro.v2008 1DVD

Auto·Des·Sys Form·Z RadioZity v6.0, (2D3D SOLID AND SURFACE MODELER),
1 CD

 Corel Draw
 PhotoShop
 3D Studio MAX
 FreeHand
 ArcView

Archicad
2006/05/01 Archicad.v10.17, 1 CD
2006/05/24 Graphisoft.ArchiCAD.v10.International 1CD
2006/06/10 Artlantis.R.v1.1.0.12.Multilanguage, 1 CD
2006/07/06 Artlantis.Studio.v1.2.0.0.Multilanguage
2006/10/07 Artlantis.Studio.v1.2.2.1.Multilanguage
2007/06/03 Graphisoft.ArchiCAD.v11.International 1CD

 ALLPlan
Nemetschek Allplan v2006.0 Multilanguage INTERNATIONAL MULTILANGUAGE,
1 CD
2006/06/10 Nemetschek.Allplan.v2006.0a3, 1 CD
2006/06/19 Nemetschek.Allplan.v2006.0a3.Multilanguage 1CD
2006/07/17 Nemetschek.Allplan.v2006.1.Multilanguage 1CD

2006/05/24 Mastercam.X.v10.0.SP1 1CD
2006/06/25 Mastercam.X.v10.2.MR2 2CD

 MicroStation
 Architec. Desktop
 Land Desktop
 ArcGIS - ESRI ARCGIS DESKTOP V9.2 (GIS) 1DVD

Catia
2006/02/22 Dassault.Systemes.Catia.P2.v5r16.Multilanguage 2CD
2006/02/22 Dassault.Systemes.Catia.P3.v5r16.Multilanguage 2CD
2006/02/22 Dassault.Systemes.CATIA.V5R16.SP1 1CD
           Dassault.Systemes.CATIA.V5R16.SP2 1CD
2006/06/10 Dassault.Systemes.Catia.P3.v5r16.SP4 4CD
2006/08/04 Dassault.Systemes.CATIA.P2.V5R16.SP5 1DVD
2006/08/04 Dassault.Systemes.CATIA.P3.V5R16.SP5
2006/09/04 Dassault.Systemes.CATIA.P2.V5R16.SP6 1DVD
2006/09/04 Dassault.Systemes.CATIA.P3.V5R16.SP6
2006/10/07 Dassault.Systemes.CATIA.P2.V5R16.SP7 1 DVD
2006/10/07 Dassault.Systemes.CATIA.P3.V5R16.SP7
2006/10/07 Dassault.Systemes.CATIA.V5R16.SP7 1DVD

2006/11/06 Dassault.Systemes.P3.CATIA.V5R17 3CD
2006/11/06 Dassault.Systemes.CATIA.V5R17.SP1 1CD
2006/11/06 Dassault.Systemes.CATIA.V5R17.SP2 1CD
2006/12/19 Dassault.Systemes.CATIA.V5R17.SP3 1DVD

Dassault.Systemes.DELMIA.MULTICAX.V5R14 1CD
Dassault.Systemes.DELMIA.V5R14.Documentation 3CD
Dassault.Systemes.DELMIA.V5R14 2CD
Dassault.Systemes.DELMIA.MULTICAX.V5R15 1CD
Dassault.Systemes.DELMIA.V5R15.Documentation 3CD
Dassault.Systemes.DELMIA.V5R15 2CD
Dassault.Systemes.DELMIA.MULTICAX.V5R16 1CD
Dassault.Systemes.DELMIA.V5R16.Documentation 3CD
Dassault.Systemes.DELMIA.V5R16 2CD
Dassault.Systemes.DELMIA.MULTICAX.V5R17 1CD
Dassault.Systemes.DELMIA.V5R17.Documentation 3CD
Dassault.Systemes.DELMIA.V5R17 2CD

2006/05/24 Delcam.Powermill.PM6008.CB1071050.SP7a.Multilanguage 1CD
2006/12/31 Delcam.PowerMILL.7006.CB1084527.SP3.Multilanguage 1DVD

FORAN 2006 V60, 1 DVD

THE PROGRAM CD, INCLUDES THE FOLLOWING MODULES

            HULL FORM
            NAVAL ARCHITECTURE
            HULL STRUCTURE
            MACHINERY AND OUTFITTING
            ELECTRICAL
            ACCOMODATION
            DRAFTING
            VIRTUAL REALITY - DESIGN REVIEW
            VR - ESTEREOSCOPIC TABLE
            INFORMATION MANAGEMENT
            PRODUCTION LINKS
            MANAGEMENT LINKS
            INTERFACES
            DELEVOPMENT TOOLKIT

2005/12/08 Formsys.Maxsurf.v11 1CD
          ( HULLSPEED V11.00 FOR MAXSURF,
            HYDROMAX PRO V11.00 FOR MAXSURF,
            MULTIFRAME 2D V11.00,
            MULTIFRAME 3D V11.00,
            MULTIFRAME 4D V11.00,
            MAXSURF PRO V11.00,
            NEOFORM V11.00,
            PREFIT V11.00 FOR MAXSURF,
            STEEL DESIGNER V11.00,
            SEAKEEPER V11.00 FOR MAXSURF,
            SECTION MAKER V11.00,
            SPAN V11.00 FOR MAXSURF,
            WORKSHOP PRO V11.00 FOR MAXSURF )

24.11.2006: Tribon M3 Service Pack 5, 1 CD

NAPA ( Naval Architecture Package), v 2006, 1 DVD
   modules ...
   -------------------------------
   Software for Ship Design

      NAPA
         NAPA for Contract Design
         NAPA Steel
         NAPA for Statutory Compliance
         NAPA Hull Form and Performance
         NAPA Outfit
         NAPA Emergency Response
   -------------------------------
   Software for Ship Operations

      Onboard-NAPA
         Loading Computer
         Decision Support for Flooding Control
         NAPA CBT
      NAPA SPS
         NAPA Power
         NAPA Fuel Management System
         NAPA Performance
   -------------------------------

2007/06/03 Proteus.Engineering.FASTSHIP.v6.1.29
2007/06/03 Proteus.Engineering.MAESTRO.v8.7.6

CATIA V5R17 - STRUCTURES FUNCTIONAL DESIGN 2 (SFD), 1 DVD

   Define structural design elements and materials used to build
complex products like ships, large machinery and process equipment.

CATIA V5R17 - SHIP STRUCTURE DETAIL DESIGN 2 (SDD), 1 DVD

   Detail heavy structural systems made up of assemblies of plates and
stiffening elements and provide features necessary to creating ship
hulls, offshore platforms or other large structural assemblies.

CATIA V5R17 - STRUCTURE PRELIMINARY LAYOUT 2 (SPL), 1 DVD

   Define conceptual design of 3D spatial layouts and subdivisions of
areas commonly found in ships large machinery and complex process
equipment.

   -------------------------------

Jewelry design Software - Gemvision Matrix 3D Version 5.3,
Solidscape_Jewelcad_v5.12, Delcam ArtCAM JewelSmith v8.1,
Digital.Goldsmith.v4.0, Rhino and Addons

2006/05/24 Siemens.SIMATIC.WinCC.Flexible.2005.Edition.
0406.Multilanguage 3CD

 Solid Works
2006/09/04 SolidWorks.2007.Office.Premium 6CD
Nr=5291 SOLIDWORKS VERSION 2007 SP2 OFFICE PREMIUM 32BIT (3D MODELING)
1DVD

2006/03/01 CSI.SAP2000.V10.0.1, 1 CD
2006/06/19 CSI.ETABS.Nonlinear.v9.0.4 1CD
2006/08/23 CSI.ETABS.NL.v9.0.7 1CD
2006/06/25 Working.Model.2D.2005.v8.0.1.0
2007/06/03 CSI.ETABS.NL.v9.1.4 1CD

 Unigraphics

 PTC Pro Engineer
2006/04/03 PTC.Pro.Engineer.Wildfire.v3.0 3CD
2006/04/03 PTC.Pro.Engineer.Wildfire.v3.0.x64 2CD
2006/04/03 PTC.Pro.Engineer.Wildfire.v3.0.Linux 3CD
2006/04/03 PTC.Pro.Engineer.Wildfire.v3.0.Unix 6CD
2006/04/03 PTC.Pro.Engineer.Wildfire.Graphics.Library.v3.0 1CD
2006/06/25 PTC.Pro.Engineer.Wildfire.v3.0.M020/x64/Linux 3CD/2CD/2CD
2006/08/16 PTC.Expert.Moldbase.Extension.v5.0.M010 2CD
2006/08/16 PTC.Routed.System.Designer.V6.0.M040 2CD
2006/08/23 PTC.Pro.Engineer.Wildfire.v3.0.M030(win32/x64/Linux) 3CD/
3CD/2CD
2006/11/14 PTC.Pro.Engineer.Wildfire.v3.0.M040 3CD
2007/02/03 PTC.InterComm.EDAconduit.v2.10.F000 1CD
2007/02/03 PTC.InterComm.Expert.v5.1.M070 1CD
2007/03/22 PTC.InterComm.Expert.v5.2.F000 1CD
2007/04/14 PTC.Pro/ENGINEER.WildFire.v3.0.M060 1DVD
2007/05/19 PTC.Pro.ENGINEER.Wildfire.v3.0.M070.(Win32/Win64) 1DVD/1DVD
2007/06/03 PTC.Pro.ENGINEER.Wildfire.v3.0.M080(Win32/64/Linux) 3DVD

 Solid Edge

 Surfware.Surfcam.Velocity.v2006.SP2 1CD ( powered by truemill,
rapidrough )
2007/05/19 Surfware.SurfCAM.Velocity.III 1CD

 AlphaCAM
 2006/06/25 VariCAD.2005.v3.0

--------------------------------------------------

Copra Roll Forming Software v2007, 1 DVD,

Ubeco Profil Roll Form Software v4.3, 1 DVD,

Nemetschek VectorWorks.V12.WIN/MAC.OSX 3CD

WSCAD 4.1, 1 CD

Missler Topsolid 2006 v6.6 1CD

------------------------------------------------------------------------------------

Geophysical/Geological Software, Reservoir Modeling, Simulation, GIS,
other

------------------------------------------

Seismic Micro-Technology, Inc. ( SMT ) KINGDOM software

modules:

- 2d/3dPAK (seismic interpretation)

- EarthPAK (geological interpretation)

- VuPAK (3D interpretation and visualization)

- AVOPAK (AVO Interpretation and Analysis)

- Rock Solid Attributes (advanced 3D post-stack seismic attribute
generation)

- SynPAK (synthetic seismogram generation)

- TracePAK (post-stack seismic data analysis and processing)

- ModPAK (geophysical/geological subsurface model generation)

- PAKnotes (SMT's knowledge-based management feature)

------------------------------------------

Seismic Micro-Technology, Inc. ( SMT ) Reservoir Modeling Software

modules :

- (RC)2 ( INTEGRATED 3D MODELING FOR COMPLEX STRUCTURAL AND
STRATIGRAPHIC RESERVOIRS )

-----------------------------------------

Seismic Micro-Technology, Inc. ( SMT ) SURE line of advanced reservoir
simulation software

modules :

- SURESim v.5 ( ADVANCED RESERVOIR SIMULATION )

- SUREGrid v.5 ( UNSTRUCTURED GRIDDING PRESERVES FULL GEOLOGICAL
DETAILS INTO SIMULATION )

- SUREPlot v.5  ( POST-PROCESSING VISUALIZATION OF PRODUCTION RESULTS
FROM RESERVOIR SIMULATION )

- SUREPVT ( PHASE BEHAVIOR AND CHARACTERIZATION SOFTWARE PROGRAM )

-----------------------------------------

GOCAD 2.0.8, 1 CD

-----------------------------------------

Schlumberger.Petrel.v2005 1CD

-----------------------------------------------------------------------------------

PROMAX VERSION 2.0, END OF FEBRUARY 2007, SUPPORT FOR WINDOWS VISTA,
VISIO 2007

PROMAX UPDATE TO VERSION 1.2.5342.0

PROMAX, version 1, YEAR 2005,

PROSIM, VERSION 1, YEAR 1983,
        REV 1 1988, GRAPHICAL INPUT INTERFACE
        REV 2 1992, INTERACTIVE GRAPHICAL INTERFACE
        REV 3 1995, HEATER RISING / SIZING

TSWEET, VERSION 1, YEAR 1978

BR&E's  release of ProMax 2.0. ProMax 2.0 includes many new
significant features including complete reactor suite modeling, Claus
Sulfur plants, pipeline and line sizing improvements, relief valve
sizing, user value objects, recovery and energy budget summaries,
support for Microsoft Visio 2007 and Microsoft Windows Vista, and much
more.

Bryan Research & Engineering, Inc.'s release of ProMax version 2.0.
ProMax 2.0 is a major upgrade and includes a complete reactor suite
for modeling kinetic (plug flow and stirred tank), equilibrium,
conversion, and Gibbs minimization schemes. We are especially proud of
the ability to model Claus sulfur recovery plants through a predefined
Gibbs minimization approach similar to that of TSWEET. With this
addition, users of ProMax can easily model the entire gas processing
plant in one project file.

Many other improvements have also been made in areas such as exchanger
rating, pipeline modeling, amine sweetening, glycol dehydration,
relief valve sizing, new components and property package and much
more. Each of these new enhancements is aimed at making the ProMax
simulation experience the best possible.

===================================

-------------------------------------------------

2006/06/25 OrCAD.v10.5.SP1

-------------------------------------------------

Sisoft Quantum-SI, v2006, 1 DVD

Supported Operating Systems

Solaris 8/9
Windows 2000/XP
Linux X86: Kernel version 2.4.26; Libc version 2.3.3
x86 Linux and Solaris compute farms are available for the Quantum-SI
simulation engine and HSPICE

Supported CAD Layout Systems

Allegro
Expedition PCB
PowerPCB
Board Station
P-CAD

---------------------------------------------------

1) BELTSTAT v7.0 pro ed., 1 CD
   http://www.conveyor-dynamics.com/beltstat/

2) mine conveyor, mConv3, 1 CD,
   http://www.mineconveyor.com/

3) HELIX delta-T for WINDOWS, v5, pro ed., 1 CD
   http://www.helixtech.com.au/newpage133.htm

---------------------------------------------------

NEPLAN v 5.3.2 ( BCP Switzerland ), 1 DVD

 modules

 1) Load Flow Analysis module
 2) Short Circuit Calculations module
 3) Motor Starting Analysis module
 4) Harmonic Analysis
 5) Relay Selectivity Analysis

---------------------------------------------------

Digsilent Power factory 13.1 ( www.digsilent.de ), 1 DVD

  modules

 1) Standard module
 2) Distribution module
 3) Transmisson module
 4) Industrial module
 5) Enterprise module

---------------------------------------------------

Etap programs, 2 CDs

- Etap PowerStation  v5.00, 1 CD
- Etap     v5.0, 1 CD

---------------------------------------------------
===================================================
---------------------------------------------------

shoe cad software

COMPUTER AIDED DESIGN DIMENSIONS! V_4.3
COMPUTER AIDED MANUFACTURING PROCUT V_5.0
COMPUTER AIDED MANUFACTURING DCS V_2.3
PRODUCT INFORMATION MANAGEMENT PROCOST V_4.4
PRODUCT INFORMATION MANAGEMENT-INTERNET PROCOST.NET V_2.0
PRODUCT INFORMATION MANAGEMENT GDM V_3.0
PRODUCT INFORMATION MANAGEMENT-INTERNET GDM.NET V_2.0
PRODUCT DATA MANAGEMENT STYLEMANAGER V_3.2
PRODUCT DATA MANAGEMENT-INTERNET STYLEMANAGER.NET V_3.2
VARIOUS SOFTWARE UC V_1.9
VARIOUS SOFTWARE ENCICAD V_2.8

( procam-networks.com )

---------------------------------------------------
===================================================
-------------------------------------------

DNC Software

DNC Link - Single station license

DNC Link - Additional station license

DNC Term software

-------------------------------------------

CNC Verification Software

N-Vision software - DOS (includes turning & milling interpreters)

N-Vision 2000 Virtual Turning Center - first seat license

Additional seat license

Network license

N-Vision 2000 Virtual Machining Center - first seat license

Additional seat license

Network license

N-Vision 2000 Virtual Machining & Turning

Center - first seat license

Additional seat license

Network license

-------------------------------------------

Maestro's CNC Courseware - various packages

-------------------------------------------
===========================================

ProEst General Construction Estimating Software v2006, 1 DVD

ProEst General Estimating
ProEst Electrical Estimating
ProEst Mechanical Estimating
ProEst Digitizer Takeoff
ProEst Service Plan
Industry Databases
GTCO Digitizers

( http://www.proest.com/general.htm )

------------------------------------------------------------

Mazak CPC Software, v 2006, 1 DVD

CAMWARE v 5-5-01
CYBER SCHEDULER v 5-5-02
CYBER TOOL MANAGEMENT v 5-5-03
CYBER MONITOR v 5-5-04
MAZATROL HUB v 5-5-05
CONCEPT v 5-5-06

------------------------------------------------------------

FANUC Robotics Simulation Software, v 2006, 1 DVD

ROBOGUIDE-HandlingPRO
ROBOGUIDE-PalletPRO and PalletTool
ROBOGUIDE-WeldPRO
FANUC Robotics' WinOLPC

------------------------------------------------------------

Mitsubishi Melsec GX Developer v7, 1 CD
Mitsubishi Melsec GX Simulator v6, 1 CD

Melsec Series GPP for Windows vSW2D5-6PPW-E, 1 CD

========================================================================

Lantek CAD/CAM: CAD/CAM Solution for cutting and punching metal plane

----------------------------------------------

Lantek Expert II
       CAD/CAM system specially designed for automating the
programming of sheet metal cutting and punching machines.

modules

Lantek Expert II.1 Lantek Expert Cut Oxifuel/Plasma
       CAD/CAM system specially designed for automating the
programming of sheet metal cutting machines.
Lantek Expert II.2 Lantek Expert Cut Laser
       CAD/CAM system specially designed for automating the
programming of sheet metal cutting machines.
Lantek Expert II.3 Lantek Expert Cut Waterjet
       CAD/CAM system specially designed for automating the
programming of sheet metal cutting machines.
Lantek Expert II.4 Lantek Expert Punch
       CAD/CAM system specially designed for automating the
programming of CNC punching machines.
Lantek Expert II.5 Lantek Expert Quattro
       Optimisation for rectangular parts.
Lantek Expert II.6 Lantek Expert Duct
       Module for the calculation of heating, cooling and ventilation
ducts.

----------------------------------------------

Lantek Expert III
       Enterprise Resource Planning software designed for use in the
Sheet metal and Fabrication industry.

modules

Lantek Expert III.1 Lantek Expert III Quotes
       Allows the user to produce accurate quotes for most processes
by calculating exact production times and costs.
Lantek Expert III.2 Lantek Expert III Sales
       Software designed for the processing of Sales related
information: Items, Quotes, Sales Orders, Delivery Notes, Invoices.
Lantek Expert III.2 Lantek Wos
       System for production follow-up and control for sheet metal
processing companies.

----------------------------------------------

Lantek Flex3D
       Family of products enabling sheet metal parts to be designed in
3Dimensions.

Lantek Flex3D.1 Lantek Flex3D Unfolding
       An application which enables simple and intuitive design of
parts in 3D and their subsequent automatic unfolding.
Lantek Flex3D.2 Lantek Flex3D Tubes
       A specific application for the design and cutting of tubes.
Lantek Flex3D.3 Lantek Flex3D Bending
       An application permitting the bending sequence to be generated
automatically from the 3D design.
Lantek Flex3D.4 Lantek Flex3D SW
       An application which allows any 3D sheet metal design to be
automatically unfolded to Lantek Expert, integrated with SolidWorks$(D??(B.
Lantek Flex3D.5 Lantek Flex3D SE
       An application which allows any 3D sheet metal design to be
automatically unfolded to Lantek Expert, integrated with Solid Edge$(D??(B.
Lantek Flex3D.6 Lantek Flex3D 5X
       An application which allows any 3D sheet metal design to be
automatically unfolded to Lantek Expert, integrated with Solid Edge$(D??(B.
Lantek Flex3D.7 Lantek Flex3D Inventor
       An application which allows any 3D sheet metal design to be
automatically unfolded to Lantek Expert, integrated with Autodesk
Inventor$(D??(B.

========================================================================

AMADA CAD/CAM software

SheetWorks for Unfold - [3D solid sheet-metal CAD]
AP100 - [2D CAD/CAM]
AP100-alfa - [3D CAD/CAM/ NESTING]
BEND/CAM - [Automatic bending data programming system]
ASTRO CAM II - [CAM for Bending Robot]
WIN-NEST - [Nesting software]

=====================================================================

Loads of GREAT SOFTWARE ( 20,000 plus programs DVDS and CDs), Mazak
CPC Software, FANUC Robotics Simulation Software, Lantek CAD/CAM,
AMADA CAD/CAM, Copra Roll Forming, Ubeco Profil Roll Form, CAx, CAD,
CAM, CAE, GIS, Roll Forming, electronics, EDA. LSI, PCB, FPGA, VHDL,
&Other Design CDs, Naval Architecture Software Maxsurf, Autoship,
FORAN, Tribon M3, NAPA, Jewelry design Software,  working, tested,
fully functional, very cheap discounted price, low cost, please send e-
mail ola@mail.gr, ola3@mailbox.gr