おばら と申します。


FreeBSD 5.3-RELEASEでIOデータのUSBフラッシュメモリ（EAST DISK 128）を刺してマウントしよう
としたら、怒られました。

FB53# mount_msdosfs /dev/da0 /mnt/usbdisk
mount_msdosfs: /dev/da0: No such file or directory
FB53# mount_msdosfs /dev/da0s1 /mnt/usbdisk
mount_msdosfs: /dev/da0s1: No such file or directory

で/dev を確認したら、確かにありません。

FB53# pwd
/dev
FB53# FB53# ls -l
crw-rw----  1 uucp     dialer    237, 192 11 23 22:05 cuala0
crw-rw----  1 uucp     dialer    237, 193 11 23 22:05 cuala1
crw-------  1 root     wheel     173,   0 11 23 22:05 devctl
cr--------  1 root     wheel     234,   0 11 23 22:05 devstat
crw-rw-rw-  1 root     wheel      30,   3 11 23 22:05 dsp0.0
crw-rw-rw-  1 root     wheel      30, 0x00010003 11 23 22:05 dsp0.1
crw-rw-rw-  1 root     wheel      30,   5 11 23 22:05 dspW0.0
crw-rw-rw-  1 root     wheel      30, 0x00010005 11 23 22:05 dspW0.1
crw-rw-rw-  1 root     wheel      30,  11 11 23 22:05 dspr0.0
dr-xr-xr-x  2 root     wheel          512 11 24 07:05 fd

dmesgにもumassはありますが、daはありません。
FB53# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #3: Tue Nov 23 22:01:00 JST 2004
    ayupapa@FB53.myhome:/usr/src/sys/i386/compile/MYKNL2
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 100663296 (96 MB)
avail memory = 93016064 (88 MB)
K6-family MTRR support enabled (2 registers)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 1.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd800-0xd81f irq 5 at device 1.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: I-O DATA USB Flash Disk, rev 2.00/2.00, addr 2
pci0: <bridge, PCI-unknown> at device 1.3 (no driver attached)


FB53# usbdevs
addr 1: UHCI root hub, Intel
 addr 2: USB Flash Disk, I-O DATA

KERNEL再構成の際は、device daは　有効にしています。
# SCSI peripherals
device          scbus           # SCSI bus (required for SCSI) For USB Flash
device          da              # Direct Access (disks) For USB Flash
device          pass            # Passthrough device (direct SCSI access)

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da For USB Flash
device          ums             # Mouse


なぜ、daが生成されないんでしょうか。

よろしくお願いします。



-- 
OBARA mailto:ayupapa@arabo1.zive.net