Make sure you have HotSync manager loaded on your PC. Then right click the
HotSync manager in your taskbar on your PC and make sure "Local USB" is
checked.

Just leave COM1 selected because that is for your serial connection and
you're not using that.

-- 

Cheers,
better known as McGrady's cousin

===========================
Vince Carter - Half Man, Half A Season.


"Eli Aran" <eli_yardena@hotmail.com> wrote in message
news:2lg2pgFcicpjU1@uni-berlin.de...
>         I have winxp pro and my CPU/Ram are: p4 2.4GHz 256MB
>         I need a driver to support the USB connection from my palm hand
held
> to my pc.
>         the Hotsync app provided by the Palm CD only offers me to choose
> between COM1 and COM3. no USB option to select.
>         the  Palm web site support told me to log into windows as
> administrator and re-install the Palm Desktop program again from the CD
but
> did not provide the USB option to choose either.
>         I connect the USB cable from the cradle to a USB slot in my pc and
> press the synchronization button on the cradle or select the Hotsync
program
> in it. if device manager is open I can see suddenly a new "unknown USB
> device" in the hardware list with code 28 in its properties. this device
> disappears with its yellow question mark immediately after the
> synchronization fails and stops.
>         I need a USB driver for the palm m515 I have, because so-far I can
> only use it as stand alone or to recharge the battery - no synchronization
> or installation possible in it.
> note: all the USB devices are working well in the device manager list.
> (is it possible that the palm cradle USB connection cable is physically
> damaged?)
>         thank you
>
>
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.718 / Virus Database: 474 - Release Date: 09-Jul-04
>
>