Type 1, 2 and 3 only refer to the thickness of the card. That has nothing to 
do with 16/ 32 bit functionality.
I believe you will need Card Services but can't remember what operating 
systems support it. Your laptop may have it already installed.
Terry

"Garbin" <igcain@lineone.net> wrote in message 
news:ofIhf.4016$GC1.2231@newsfe6-gui.ntli.net...
>
> Hi
>
> Thanks for the reply.  The manual for the PC doesn't mention 32-bit but it 
> does say that Slot '0' can take type I, II and III cards whilst slot '1' 
> only takes type I and II.
>
> Also do I need to install the Toshiba card services?  The default Windows 
> 95 install seems to recognise the PCMCIA slots OK
>
> Cheers
>
> "tc" <terrycassidy@msn.com> wrote in message 
> news:AUphf.129764$y_1.6@edtnps89...
>>
>> You need to determine whether the 400CS supports Cardbus as a 32 bit card 
>> is Cardbus. Either both slots or neither is 32 bit on the laptop.
>> The users manual is here.
>> http://209.167.114.38/support/Download/files_downloads/index/SatellitePro/sp400en.htm
>> Terry
>>
>> "Garbin" <igcain@lineone.net> wrote in message 
>> news:31mhf.4763$a15.2925@newsfe5-win.ntli.net...
>>>
>>> Hi
>>>
>>> I have (for supporting legacy software applications) an ancient (yet 
>>> reliable) Toshiba Satellite Pro 400CS running Windows (non-OSR2).  I now 
>>> find I need to connect it to our ethernet LAN.  So I purchased a 3Com 
>>> 3c589B PCMCIA newtork adapter and despite it appearing to install 
>>> correctly I am having problems.  My questions are:
>>>
>>> 1) is this adapter CARDBUS? (it says it is 32-bit but is that the same 
>>> thing?)
>>> 2) if it is 32-bit which PCMCIA slot should it be put in ('0' or '1')?
>>> 2) do i need to upgrade to OSR2 to get it to work?
>>>
>>> Thanks
>>> Garbin
>>>
>>>
>>
>>
>>
>
>
>